DJI Matrice 4E
DJI Matrice 4E Intelligent Multi Sensor Drone
Starting from
The DJI M4E drone is part of the M4 series of intelligent, multi sensor drones for enterprise applications. The Matrice 4E is designed for geospatial applications such as surveying and mapping, construction, and mining. equipped with advanced features such as smart detection and measurement with laser range finder. Flight operations are now safer and more reliable with significantly enhanced sensing capabilities.
Available Packages
- DJIM4EPLUS
- DJI Matrice 4E Including DJI Care Enterprise Plus Auto-Activated
Add-Ons
- Auto-activated
- DJI Zenmuse L3 with DJI Care Enterprise Plus

Key Features Include:
- 3-directional ortho capture and 5-directional oblique capture
- Built in RTK module
- 49-minute flight time.
- Minimum capture interval of 0.5s
- Real time AI detection of people and vehicles
- Laser range finder for real-time precision measurement
- Excels in low-light environments
- 3D Smart capture for precision modelling

Flight operations are now safer, more reliable, and powered by AI, with significantly enhanced sensing capabilities. The accessories for the Matrice 4 series have also been significantly upgraded.
The Matrice 4E is designed for geospatial applications such as surveying and mapping, construction, and mining. The M4E comes with a built-in RTK module and has 49minutes flight time. It has 3-directional ortho capture and 5-directional o blique capture, significantly enhancing mapping efficiency compared with conventional operating modes.
M4E5-directional oblique will increase 40% efficiency compared with the M3E. TheM4E supports a maximum flight speed of 21m/s, and a minimum capture interval of0.5s.
DistortionCorrection 2.0 provides high-precision in-camera distortion correction with residual distortion less than 2 pixels.
Remote controller integrates with DJI Terra modelling capability, making it possible to generate precise mapping route and capture detailed modelling. More powerful obstacle avoidance allows to complete diversified and complex close-range modelling.
.webp)
Hardware Specifications

Hardware Specifications
- Product Name Zenmuse L3
- Point Cloud System Accuracy
- At 120 m flight altitude: Vertical accuracy: 3 cm (RMSE); Horizontal accuracy: 4 cm (RMSE).At 300 m flight altitude: Vertical accuracy: 5 cm (RMSE); Horizontal accuracy: 7.5 cm (RMSE).
- Point Cloud Thickness
- 1.2 cm @ 1σ (120 m nadir flight altitude);
- 2 cm @ 1σ (300 m nadir flight altitude).
- Weight1.60 kg (without single gimbal connector).
- Dimensions (L×W×H)
- 192 × 162 × 202 mm
- Supported Aircraft DJI Matrice 400 (requires the Zenmuse L3 single gimbal connector).
- Ingress Protection RatingIP54
- Operating Temperature
- -20°C to 50°C
- Lidar Laser Wavelength
- 1535 nm
Hardware Specifications
- Product Name
- Matrice 400
- Take-off Weight
- Without batteries: 5020 g
- With batteries: 9740 g
- Dimensions (L × W × H)
- Folded: 490 × 490 × 480 mm
- Unfolded: 980 × 760 × 480 mm
- Max Payload
- 6 kg
- Propeller Size
- 25 inches
- Max Ascent Speed
- 10 m/s
- Max Takeoff Altitude
- 7000 m
- Max Flight Time (No wind)
- 59 min
- Measured with the aircraft flying forward at 10 m/s in a windless environment at sea level, carrying only the H30T (total weight 10,670 g), from 100% to 0% battery.
- Data is for reference only; actual experience may vary depending on environment, usage, and firmware version.
- Max Flight Distance (No wind)
- 49 km
- Measured flying forward at a constant 17 m/s in a windless environment at sea level, without external payloads, from 100% to 0% battery.
- Results may vary by environment, usage, and firmware.
- Max Wind Speed Resistance
- 12 m/s (during take-off and landing)
- Compatible Battery
- TB100
- Operating Temperature
- −20° to 50° C (−4° to 122° F), without solar radiation
- Sensing Type
- Omnidirectional binocular vision system (surround view via full-colour fisheye sensors)
- Horizontal rotating LiDAR
- Upper LiDAR
- Downward 3D infrared range sensor
- Six-direction mm-wave radar
- FPV Camera Resolution
- 1080p
- Video Transmission System
- DJI O4 Enterprise Enhanced Video Transmission System
- DJI Products Compatible with M400
- Gimbal Cameras:
- Zenmuse H30
- Zenmuse H30T
- Zenmuse L2
- Zenmuse P1
- Accessories:
- Zenmuse S1 (drone spotlight)
- Zenmuse V1 (drone speaker)
- Manifold 3
- DJI RC Plus 2 sub2G SDR Module
- DJI Cellular Dongle 2
- RTK Station:
- D-RTK 3 Multifunctional Station
- D-RTK 2 Mobile Station
- Ecosystem Accessories:
- DJI X-Port
- DJI E-Port V2 Development Kit
- DJI E-Port V2 Coaxial Cable Kit
- DJI SKYPORT V3 Adapter Set
- DJI SKYPORT V3 Coaxial Cable Kit
- Gimbal Cameras:
Product Reviews
Related Accessories
Frequently Asked Questions
%201%20(1).webp)



